5, Jalan Bayu 2/3,
Taman Perindustrian Tampoi Jaya,
81200 Johor Bahru,
Johor, Malaysia.
+607-2362814
+607-2362396
019-7774523(Mr Lee)
019-7712489 (Jimmy)
lee@innochamp.com.my
jimmy@innochamp.com.my
JH25 Series Open Dual-point Press Machine
Previous ‹‹ | » Next |
Features:
1、Extra large worktable, suitable for great area sheet metal pressing and automatic step molding production, high working efficiency.
2、Steel welded body enhancing the intensity and rigidity of the machine.
3、Precisely grinded rack wheel and wheel shaft, low machine operation noise and stable operation.
4、Adoption of dry or wet pneumatic frictional clutch-detent, the movements are sensitive.
5、 Adoption of dual-crooked shaft converse transmission, providing excellent synchronization and strong anti carry-deflection capability.
6、Slide blocks with six-sidedrectangle gui derail, the guidance is excellent and the precisions are pinpointed.
7、Stepless gearings motor or device, fitting the craftsmanship of different pressing parts.
Standard Configuration:
1、Hydraulic over loading protection system.
2、Automatic lubricating system.
3、Mould installation height adjustment device.
4、Stepless gearing electromotor device.
5、Digital display mould height indicator.
6、Balance unit for slide block and mould.
7、Electronic cam controller system and movable electrical equipments control box.
8、Movable operation box for both hands.
9、Air power material blowing device.
10、Shock resist rubber mat.
Optional part: (shall be indicated in the purchasing contract)
1、Air bag mould mat device.
2、Photo electricity safety device.
3、Pedal power switch.
4、Automation on feeding output shaft.
5、Automatic feeding device.
6、Papid mold displacing unit.
主要技术参数:
型号/技术参数 Model/Technical parameters |
JH25-110 | JH25-160 | JH25-200 | JH25-250 | JH25-315 | ||||||||
L | S | L | S | L | S | L | S | L | S | ||||
滑块公称压力(KN) Slide block nominal pressure(KN) |
1100 | 1600 | 2000 | 2500 | 3150 | ||||||||
能力发生位置(mm) Capacity engender position (mm) |
5/3 | 6/3.5 | 7/4 | 7/4 | 7/4 | ||||||||
滑块行程(mm) Slide block stroke (mm) |
180/110 | 200/130 | 250/150 | 250/150 | 280/180 | ||||||||
行程次数 (S.P.M) Stroke frequency (S.P.M) |
L | 35-65 | 30-55 | 25-45 | 25-40 | 20-35 | |||||||
S | 45-80 | 40-75 | 35-60 | 30-55 | 30-50 | ||||||||
最大封闭高度(mm) Max closing height(mm) |
400/435 | 450/485 | 500/550 | 550/600 | 550/600 | ||||||||
封闭高度调节量(mm) Closing height adjust measurement(mm) |
90 | 100 | 110 | 120 | 120 | ||||||||
滑块中心距机身距离(mm) Distance between the center of the slide block and the body(mm) |
350 | 390 | 430 | 450 | 450 | ||||||||
工作台至地面距离 (mm) Distance between the worktable and ground (mm) |
900 | 900 | 1000 | 14100 | 1100 | ||||||||
工作台尺寸 (mm) Worktable measurements (mm) |
左右 Left Right |
1880 | 2040 | 2420 | 2700 | 2700 | |||||||
前后 Front Behind |
680 | 760 | 840 | 920 | 920 | ||||||||
滑块底平面尺寸 (mm) Plane dimension of the slide block bottom (mm) |
左右 Left Right |
1360 | 1500 | 1850 | 2100 | 2100 | |||||||
前后 Front Behind |
520 | 580 | 650 | 700 | 700 | ||||||||
外形尺寸 |
左右 Left Right |
2170 | 2340 | 2720 | 2970 | 2990 | |||||||
前后 Front Behind |
1790 | 2040 | 2500 | 2750 | 2950 | ||||||||
高 Height |
3130 | 3823 | 4050 | 4350 | 4360 | ||||||||
气囊 Airbag |
顶出能力KN Propping capacity KN |
35×2 | 63×2 | 80×2 | 100×2 | 140×2 | |||||||
行程 mm Stroke mm |
70 | 80 | 90 | 100 | 100 | ||||||||
顶板面积 mm Propping plate acreage mm |
350×220×2组 | 410×220×2组 | 460×340×2组 | 540×420×2组 | 560×420×2组 | ||||||||
电动机功率(kw) Electromotor Power (kw) (Fixation/Variable) |
15 | 18.5 | 22 | 30 | 37 | ||||||||
重量(kg) Weight (kg) |
14500 | 21000 | 28500 | 38000 | 42500 | ||||||||
使用空气压力(Mpa) Air pressure used (Mpa) |
0.5 | 0.5 | 0.5 | 0.5 | 0.5 |