Taiwan Radial Drill ★ Drilling Machine Radial Drilling Machine Johor Bahru JB Malaysia Supply, Supplier, Suppliers ★ Innochamp Machine Tools Sdn Bhd

Innochamp Machine Tools Sdn Bhd
5, Jalan Bayu 2/3,
Taman Perindustrian Tampoi Jaya,
81200 Johor Bahru,
Johor, Malaysia.

+607-2362814

+607-2362396

019-7774523(Mr Lee)

Taiwan Radial Drill

Drilling Machine --- Radial Drilling Machine ---

Previous ‹‹

» Next

Taiwan Radial Drill

MODEL			TPR-720A	TPR-820A	TPR-920A	TPR-1100
Dai.of column			210			260	A
Distance from column surface to spindle center , Max			750	850	950	1100	D+C
Distance from column surface to spindle center , Min			220			280	C
Travel of spindle head			530	630	730	820	D
Distance from base surface to spindle end , Max			1060	1210		1270	E
Distance from base surface to spindle end , Min			260	350		470	F
Elevating height of Arm			580	640		570	E-F-I
Effective area of box table			600×445×380			635×520×415	L×K×H
Dimension of base			1260×640×160			1725×715×180	R×S×Q
Taper hole spindle			MT#4
Stroke of spindle			220			230	I
R.P.M of spindle (rpm x steps)			88 , 154 , 282 , 455 , 796 , 1500×6 steps			44-1500×12 steps
Feed of spindle (rev. x steps)			0.05 , 0.09 , 0.15×3 steps			0.05 , 0.09 , 0.15 ×3 steps
Main motor (HP)			2HP			3HP
Elevating motor (HP)			1HP			1HP
Coolant equipment (HP)			1/8 HP			1/8 HP
Machine height from floor (Max.)			2170	2320		2530	M
Base + column height			1850	2010		2000	G
Net weight (approx)kgs			1120	1200	1250	1800
Shipping weight (approx)kgs			1250	1340	1400	1950
Shipping dimensions (LxWxH)			1680×826×2160	1680×826×2190	1806×864×2210	1880×864×2210
Capacity	Drilling	Stell	32Ø			42Ø
		Cast iron	50Ø			55Ø
	Tapping	Stell	25Ø			25Ø
		Cast iron	32Ø			35Ø