5, Jalan Bayu 2/3,
Taman Perindustrian Tampoi Jaya,
81200 Johor Bahru,
Johor, Malaysia.
+607-2362814
+607-2362396
019-7774523(Mr Lee)
019-7712489 (Jimmy)
lee@innochamp.com.my
jimmy@innochamp.com.my
JH25 Series Series Closed Dual-point Press Machine
Previous ‹‹ | » Next |
Features:
Integrally welded machine body, front and back side of symmetry, relieving the angle deforming phenomena of the open pressure machine, enhancing the processing precision of the press part and extending the mould life circle.
2、Adoption of dry or wet pneumatic frictional clutch-detent, the movements are sensitive and reliable.
3、Precisely grinded rack wheel and wheel shaft, low machine operation noise and stable operation.
4、Stepless gearings motor or device, fitting the craftsmanship of different pressing parts.
5、 Adoption of dual-crooked shaft converse transmission, providing excellent synchronization and strong anti carry-deflection capability.
6、Slide block JH36-160、200T with six-side guide rail, JH36-250T(and above) with eight-sided guide rail, highly precision.
7、 Two different stepless gearings and strokes are optional, appropriately fitting the craftsmanship of the pressing part andd elevating production efficiency.
Standard Configuration:
1、Hydraulic over loading protection system.
2、Automatic lubricating system.
3、Mould installation height adjustment device.
4、Digital display mould height indicator.
5、Stepless gearing electromotor device.
6、Balance unit for slide block and mould.
7、Electronic cam controller system and movable electrical equipments control box.
8、Air power material blowing device.
9、Shock resist rubber mat.
Optional part: (shall be indicated in the purchasing contract)
1、Air bag mould mat device.
2、Photo electricity safety device.
3、Pedal power switch.
4、Automatic feeding device.
5、Rapid mold displacing unit.
主要技术参数:
型号/技术参数 Model/Technical parameters |
JH36-160 | JH36-200 | JH36-250 | JH36-315 | JH36-400 | |||||||
滑块公称压力(KN) Slide block nominal pressure(KN) |
1600 | 2000 | 2500 | 3150 | 4000 | |||||||
能力发生位置(mm) Capacity engender position (mm) |
6 | 3 | 7 | 4 | 7 | 4 | 8 | 5 | 9 | 5 | ||
滑块行程(mm) Slide block stroke (mm) |
200 | 130 | 250 | 150 | 250 | 150 | 280 | 180 | 300 | 200 | ||
行程次数 (S.P.M) Stroke frequency (S.P.M) |
30-50 | 40-75 | 25-45 | 35-60 | 25-40 | 30-55 | 20-35 | 30-50 | 20-35 | 30-45 | ||
最大封闭高度(mm) Max closing height(mm) |
450 | 485 | 500 | 550 | 550 | 600 | 550 | 600 | 600 | 650 | ||
封闭高度调节量(mm) Closing height adjust measurement(mm) |
100 | 110 | 110 | 110 | 120 | |||||||
立柱间距离(mm) Distance between the worktable and ground (mm) |
1880 | 2190 | 2600 | 2600 | 2720 | |||||||
工作台尺寸 (mm) Worktable measurements (mm) |
左右 Left Right |
1800 | 2150 | 2500 | 2500 | 2600 | ||||||
前后 Front Behind |
760 | 940 | 1000 | 1000 | 1100 | |||||||
滑块底平面尺寸 (mm) Plane dimension of the slide block bottom (mm) |
左右 Left Right |
1600 | 1850 | 2100 | 2100 | 2200 | ||||||
前后 Front Behind |
650 | 750 | 850 | 850 | 950 | |||||||
机身侧口尺寸 (mm) Body side-opening measurements (mm) |
上下 Top Bottom |
500 | 550 | 600 | 600 | 650 | ||||||
前后 Front Behind |
750 | 850 | 950 | 950 | 1050 | |||||||
外形尺寸 (mm) Outline (mm) |
左右 Left Right |
2700 | 300 | 3600 | 3650 | 3800 | ||||||
前后 Front Behind |
2380 | 2790 | 2880 | 2950 | 3050 | |||||||
高 Height |
3280 | 4075 | 4800 | 4850 | 4900 | |||||||
电动机功率(kw)(固/变) Electromotor Power (kw) (Fixation/Variable) |
22 | 30 | 37 | 45 | 45 | |||||||
重量(kg) Weight (kg) |
25500 | 35000 | 42000 | 45000 | 52000 |