alturnamats - ground protection Bandsaw Machine
Bending and Folding Machine
Boring Machine CNC (PCB) Circuit Board repair service CNC Drill And Tap
CNC Gantry Milling Machine CNC Lathe
CNC Machining Center
Drilling Machine
Engraving And Marking Machine
Grinding Machine Hand Press Hydraulic Press Hydraulic Press Brake And Shearing
Iron Worker Lathe
Machine Tools
Magnetic Drill And Tap Metal and Aluminium Machining Equipment Milling Machine
Pipe Processing Machine Plasma Cutting Machine Plate Roll Machine
Power Press Precision deep hole honing machine Retrofit and Upgrading Machine ROCCIA (Italy) Metal Fabricate Machine
Sawing Machine Slotting Machine Tapping Machine
Used Machine
Vertical/horizontal rotary table Wire Straightening And Cutting Machine York Potable Machine
Innochamp Machine Tools Sdn Bhd
5, Jalan Bayu 2/3,
Taman Perindustrian Tampoi Jaya,
81200 Johor Bahru,
Johor, Malaysia.
+607-2362814
+607-2362396
019-7774523(Mr Lee)
019-7712489 (Jimmy)
lee@innochamp.com.my
jimmy@innochamp.com.my

Circular sawing machine

Previous ‹‹ » Next

Circular sawing machine


Characteristics of Semi-Auto Metallic Disc Saw Machine:
This series of pneumatic cutting machine is especially suitable for thin wall tube.
Adopt two sides and two direction clamp which make workpiece stable.
The precision is higher than band saw and bow saw with low noise and low pollution. The section is free of burrs and powder without secondary processing.
The machine head can be adjust to the left and right for beveled cutting and grooving cut.
Strong water circulation cooling system insures the life-span of saw blade.
Use pole changing motor with two speeds which can meet the requirement of different metallic material cutting.
 
Technical Specification of Semi-Auto Metallic Disc Saw Machine:
Model KM-275PA KM-315PA KM-350PA Special for copper and aluminum
KM-275PA-S KM-315PA-S KM-350PA-S
Main motor power(kw) 2.2/1.5 3/2.2kw 3/2.2 2.2 2.2 3
Rotate speed of Main Shaft(rpm) 96/48 RPM 84/42 RPM 84/42 RPM 2850 2850 2850
Outer diameter of Saw Blade(mm) 250/275mm 275/300/315mm 300/315/350 250/275 275/300/315 300/315/350
Bore OD of Saw Blade(mm) Φ32mm Φ32mm Φ32mm Φ32mm Φ32mm Φ32mm
Pin hole of Saw Blade 2×Φ11×PCD63 2×Φ11×PCD63 2×Φ11×PCD63 2×Φ11×PCD63 2×Φ11×PCD63 2×Φ11×PCD63
Maximum Round Pipe(mm) Φ80 Φ90 Φ110 Φ80 Φ90 >Φ110
Maximum Square Pipe (mm) 70×70 80×80 95×95 70×70 80×80 95×95
Cooling Water Pump(w) 90 90 90 90 90 90
Air Pressure (Mpa) 0.6-0.8 0.6-0.8Mpa 0.6-0.8 0.6-0.8 0.6-0.8 0.6-0.8
Volume of machine (mm) 950×720×1250 1100×720×1350 1160×750×1450 950×720×1250 1100×720×1350 1160×750×1450
Net Weight of machine (kg) 220kg 240kg 300kg 220kg 240kg 300kg